Types| Enclosure Cooling Fan (ECF) Systems: | Enclosure Cooling Fan enhances air circulation in an enclosure's battery compartment |
|---|
| Air flow eliminates “hotspot” premature battery failures in hotter climates |
|---|
| Significantly reduces the power supply compartment temperature |
|---|
| Calculated Mean Time Between Failure (MTBF) studies indicate this will extend Power Supply life by two years |
|---|
| PWE High Security Device: | High visibility theft deterrent |
|---|
| Stainless steel construction-corrosion resistant |
|---|
| Locking system prevents access to padlock shackle (to prevent cutting of lock) |
|---|
| Ground Mount Security Bar For UPE / UPE-M / PN Enclosures: | High visibility theft deterrent |
|---|
| Powdercoated-corrosion resistant |
|---|
| Locking system prevents access to padlock shackle (to prevent cutting of lock) |
|---|
| AlphaCell Anti-Theft Label: | Destructible vinyl- made to fracture if tampered with, will not easily peel off |
|---|
| Temperature and chemical resistant |
|---|
| Large, identifiable size (4x6) |
|---|
| DeWalt MobileLock: | Nationwide GPA Locator with Anti-Theft controls |
|---|
| Customizable alarm sensors (vibration, tamper, temperature) |
|---|
| Long life batter (up to 1 month) |
|---|
| Mobile alert via email or cell phone |
|---|
| Tamper Switch: | Magnetic door switch provides an intrusion alarm through status monitoring |
|---|
| Available with normally closed or normally open contacts |
|---|
| Battery Spacer Clip (BSC): | Designed for use with most group 27 or 31 VRLA batteries |
|---|
| Easy installation - clips to the top of the battery |
|---|
| Increases battery life expectancy by providing critical battery spacing required for proper ventilation |
|---|
| Accurately positions and secures the Remote Temperature Sensor (RTS) |
|---|
| Strongly recommended for hot climates |
|---|
| Designed to last over 30 years or lifetime of the equipment |
|---|
| Battery Retaining Bar: | Provides added security against the batteries from falling out or being thrown from an enclosure |
|---|
| Easily snaps into place |
|---|
| Module Retaining Cable: | Prevents power supply from sliding off the shelf or being thrown from an PWE enclosure |
|---|
| Bolted to enclosure and clips to handle of supply |
|---|
| Constructed of braided steel cable and carabiner style clips |
|---|
| Battery Integration Tray (BIT): | Factory installed option in any new PWE-3/6 and UPE-3/6 enclosures |
|---|
| Eliminates battery cable kits and slide trays |
|---|
| Greatly reduces battery preventive maintenance |
|---|
| Pre-wired voltage sense leads for transponder and AlphaGuard |
|---|
| Allows for the direct connection of generator |
|---|
| Battery Heater Mat: | Consumes 30% less power than previous designs |
|---|
| Durable polyester construction and insulated design |
|---|
| Sealed on-mat electronics for maximum protection |
|---|
| On-mat thermal switch and thermal fuse for redundant safety |
|---|
| Piggyback plug standard on 120V models |
|---|
| Ladder Bracket: | Provides safe access for servicing power supplies and batteries without a bucket truck |
|---|
| Attaches to PWE enclosures; does not require a pole attachment point |
|---|
| Heavy-duty galvanized steel construction |
|---|
| Includes a safety belt attachment location accepting strand hook ladders less than 20" in width |
|---|
