Need Some Help?
|
Place an Order
Home
Products
About Alpha
About Us
Careers
Contacts
Corporate Offices
Service Centers
Where to Buy
News Room
Shows & Events
News Releases
Power Up!
Newsletters
Documentation
Document Downloads
Catalogs & Collateral
White Papers
Training & Support
Tech Support
Toolkit
Return Material Auth.
SCTE-HMS MIB
Partners
Question / Answer
Alpha Technologies Inc.
Phone: 360 647 2360
Email:
alpha@alpha.com
Products
Cable / Broadband
Outside Plant Power
Status Monitoring
Status Monitoring Legacy Products
AlphaNet™ EDH3 (CMD-P)
AlphaNet™ EDH3 (CMD-P)
Adds DOCSIS Status Monitoring capability to existing power supplies
DOCSIS certified, uses existing headend equipment
Compatible with ANSI/SCTE HMS standards
Power supply support includes: XM, AM, XM2, ZTT series
Embedded Web server for remote diagnostics
E-MTA performs advanced VoIP testing
Replaces AlphaNet model EDH2 External DOCSIS Transponder
Alpha’s external DOCSIS transponder provides the ability for cable operators to manage network powering through the existing cable modem infrastructure. DOCSIS certification, SNMP and HMS MIB support, and an embedded web server enable the EDH3 (CMD-P) to provide network power data quickly and easily when and where it is needed. The transponder is fully interoperable with multiple power supply models and can be accessed using any SNMP Manager.
The EDH3 (CMD-P) can also be optionally enabled as an E-MTA to perform an advanced suite of IP and VoIP tests, thus turning it into a true cross-domain test point by combining measurements available from the HFC, DOCSIS, IP and VoIP domains.
AlphaNet EDH3 (CMD-P)
General Specifications
Model:
EDH3 (CMD-P)
Power Supplies Supported:
XM2 (requires USM2 or USM2.5)
XM (requires USM)
Lectro ZTT, ZTT+
AM (requires RPM card)
Devices Monitored:
Power Supplies, batteries, generators reported as per ANSI/SCTE 25-3 2002 (HMS-022)
DOCSIS:
Version 2.0
DOCSIS Monitoring Protocol:
SNMP v1, v2, v3
HMS Monitoring Protocol:
SNMP v1, v2
RF Transmit/Receive
Tx Frequency Range:
5 to 42MHz
Output Power:
8 to 58dBmV
Channel Bandwidth:
6MHz
Receive Center Freq Range:
91 to 857MHz (Standard, HRC, IRC channels)
Input Level:
-15 to 15dBmV
Monitored Parameters
Power Supply Data
Power Supply Model>
XM2
XM
AM
ZTT Series
Major Alarm:
X
X
X
X
Minor Alarm:
X
X
X
X
Input Line Voltage:
X
X
X
X
Output Voltage:
X
X
X
X
Battery Voltage:
X
X
X
X
Output Current:
X
X
X
X
Standby/AC Line Fail:
X
X
X
X
Equipment/Test Fail:
X
X
X
-
Enclosure Door Status:
X
X
X
X
Remote Test Control:
X
X
X
X
Number of Battery Strings:
One to Four of 36V or 48V>
Battery Data:
Individual Battery Voltages>
Battery Compartment Temperature>
Hardware
RF Cable Interface:
F-connector, Female, 75Ohm impedance
Local/Craft Interface:
RJ-12, RS-232, 19.2kb, N, 8, 1 (Required: Adapter to connect to PC serial port, Hyperterminal or equivalent)
Operating Temperature:
-40°F to 167°F
Humidity:
10 to 90% (non-condensing)
EMI/EMC:
FCC Part 15 Class A, CE EN50022 Class A
Warranty:
2 years
Management
NMS/EMS:
Standard SNMP Management Tools
HMS MIBs
In addition to the standard DOCSIS MIBs, the transponder supports the following HMS MIBs:
SCTE 25-3 (HMS-022):
Interface
SCTE 36 (HMS-050):
Root
MIB SCTE 37 (HMS-072):
Tree
MIB SCTE 38-1 (HMS-026):
Property
MIB SCTE 38-2 (HMS-023):
Alarm MIB
SCTE 38-3 (HMS-024):
Common
MIB SCTE 38-4 (HMS-027):
Power Supply
MIB SCTE 38-6 (HMS-033):
Generator
MIB SCTE 38-7 (HMS-050):
TIB MIB
Document Downloads
Title
Type
Version
Date
(legacy)
AlphaNet EDH3 (CMD-P) Datasheet_Eng
Datasheet
049-284-10-A001
August 1, 2008
Alpha XP-EDH3 Transponder Quick Start Guide_English
Manual
745-419-C3-001 Rev.A
February 1, 2009
Total Power Solutions™
Home
Products
About Alpha
News Room
Document Downloads
Contacts
Careers
Legal
Need Some Help?
Sitemap
Copyright © 2008 - 2012, The Alpha Group. All Rights Reserved.