PMR and GMR Series

Select Your Country

ProductsCable / BroadbandFiber PowerPMR and GMR Series

PMR and GMR Series

Supports field deployment of FTTx Optical Line Terminals (OLT)
FlexNet™ 300W UPS provides over 10hrs of runtime
Thermostatically controlled 48 or 120Vdc fan and heater options
Adjustable 19" EIA equipment racks
All aluminum construction, durable powdercoat finish, stainless steel hardware

The FlexNet PMR and GMR series is comprised of two sizes of pole mount and two sizes of ground mount factory configured and regulatory certified rainproof enclosure systems. PMR and GMR are highly configurable systems including 19-inch adjustable or pullout swing racks, AC service entrance and distribution, surge suppression, fiber management, power bypass cabling, FiberUPS DC power supply, DC distribution, 50Ah AlphaCell batteries and environmentally protected space for customer supplied equipment including optical line terminals, routers and switches.

FlexNet PMR and GMR Series

Enclosure Weight and Dimensions
Models	Weight (lb/kg)	Dimensions (in/mm)
PMR-S1	40/18	26 x 32.2 x 19.25 / 660 x 818 x 489
GMR-S1	49/22	27.5 x 31 x 20 / 699 x 787 x 508
PMR-S2	47/21	30 x 37 x 19.25 / 762 x 940 x 489
GMR-S2	63/29	31 x 38 x 20 / 787 x 965 x 508
Material	Powdercoated aluminum.
Vent Screen	Stainless steel fabric with .005" x .005" (.12mm x .12mm) opening size to minimize snow, water and dust ingress
Door and Lid Seal	Poron gasketing
Hardware	Stainless steel
Color	Gray (Custom colors available)
Tamper Switch	Optional

Grounding Specifications
Internal Ground Bar	Five usable lugs
Safety Ground	Adjacent to AC outlets (Optional stainless steel ground stud)
Lid	Removable (PMR Series includes lanyard)

Door (s)
PMR Series	Hinged removable with stainless steel spring latch and door open prop rod
GMR Series	Removable lift-off front and rear door

Enclosure Mounting
PMR Series	Galvanized steel brackets for wood, and concrete Pole Mount and wall mount
GMR Series	Precast polymer concrete pad or PS-6/PS-6XL pedestal systems

Thermal Management
Cooling	120Vac and 48Vdc fan options
Heating	120Vac and 48Vdc heater options

Internal Mounting Rails
Rack Mounting	EIA 19" mounting rails using Tinnerman mounting clips
Grounding	Rails grounded to chassis
Adjustment	1" increments over 6" when batteries are not installed.

Enclosure Environmental Rating
Equipment Mounting Area	Designed to IP X5 per IEC 529
	Dust Ingress controlled by screen opening
	IP X5 applies to the equipment mounting area
	The service entrance is rated 3R

Fiber Management Options
Splice Tray
Fiber Strain Relief Tie Bar Optional	19" mounting provides ability to strain relief fiber cable plugged into the front of communications equipment
Optional	Splice Tray Kit (12 count), includes Splice tray with Elastomer Splice Block, Felt Tape, Tie Wraps, Cover and Recording Label
Fiber Management Panel
Optional	Provides fiber slack storage and secures a splice tray using a Velcro strap. Tie wrap slots on sides permit securing fiber cables to panel

Power Supply & Batteries
Model	FlexNet300-48/48Vdc UPS Power Supply Module - including 60” output power cable, remote temp sensor, wall mounting brackets and alarm output connector
Batteries	48Vdc string of 85 GXL (50Ah) positioned on ends (negative terminal side down) with battery retaining bar option
Battery Cable Kit	Fused
Battery Heater	Optional
AC Service	External 70A rainproof SUSE rated breaker box with internal 120Vac 20A receptacles
Regulatory	CSA-NRTL/C (CSA 60950)

Document Downloads

Title	Type	Version	Date
Installation and Operation Manual	Manual	031-239-C0-003 Rev. C	March 1, 2006
PMR and GMR Series Datasheet - English (A4)	Datasheet	049-236-11-004	April 1, 2008
PMR and GMR Series Datasheet - English (LTR)	Datasheet	049-236-10-007	April 1, 2008