XM2-HP Series - Alpha.com

Alpha Technologies Inc.
Phone: 360 647 2360
Email: alpha@alpha.com

ProductsCable / BroadbandOutside Plant PowerPower SuppliesXM2-HP Series

Get a Free White Paper on Options in Sustainable Network Power

XM2-HP Series

High efficiency transformer
Featuring i2M™ Intelligent Inverter Module
6, 18 and 24A models available
Next generation microprocessor
Backwards compatible with XM2 CableUPS®
Embedded and External DOCSIS® status monitoring
Up to 15% more capacity than standard models

Alpha’s XM2-HP CableUPS® is the answer to the higher energy costs associated with running today’s cable networks. The XM2-HP power supply features a high efficiency transformer with lower power consumption and lower life cycle costs. This “green” power supply can greatly reduce the carbon footprint of the entire cable plant by running more efficiently 24/7. Additional features include an enhanced Smart Display with improved menus and a dedicated Communications menu with DOCSIS® parameters. The XM2-HP is available in three convenient power ratings for load matching to operate at optimal efficiency.

High Performance XM Series 2

Electrical Specifications
Model:	XM2-906HP	XM2-918HP	XM2-924HP
Input Voltage (Vac):	120 / 240	120 / 240	208 / 240
Input Power Factor (at full load):	>0.90	>0.90	>0.90
Input Voltage Window:	-30 to +20%	-20 to +15%	-20 to +15%
Input Frequency:	60Hz	60Hz	60Hz
Input Frequency Window:	±3Hz	±3Hz	±3Hz
Output Voltage (Vac):	63/87	63/75/87	63/75/87
Output Current (A):	8/6	22/18/18	22/22/24
Max Output Power (VA):	540	1620	2160
Waveform:	Quasi-square wave
Voltage Regulation:	±5%
Output Frequency Stability, Line Mode:	60Hz Nominal
Output Frequency Stability, Inverter Mode:	60Hz, ±0.05%
Short Circuit Protection:	<150% of maximum current rating
Transfer Characteristics:	Uninterrupted output
Battery Voltage (Vdc):	36	36	48

Efficiency (Typical Load Range)
Line Mode:	80-87%	90-92%	90-92%
Standby Mode:	79-84%	84-86%	84-86%

Battery Charger
Temperature Compensation:	Programmable (0 to 5mV/Cell/°C)
Charger Current:	10A at 80% load and nominal input (bulk charge mode)
Three Stage:	Bulk, accept, float

Mechanical
Status Display:	2 x 20 Blue LCD with backlight
Dimensions H x W x D (in/mm):	8.8 x 15 x 13 / 222 x 381 x 330
Approx. Weight (lb/kg):	53/24	72/32.7	95/42.9
Finish:	Black, epoxy powdercoat

Environment
Note: General Specifications reference most commonly used models. For model-specific information, consult product manual. Other voltages and configurations may be available. For more information, contact your sales representative.
Operating Ambient Temp.:	-40 to 55°C / -40 to 131°F
Relative Humidity:	0 to 95% non-condensing
Agency Compliance:	FCC Part 15 Class A, UL1778, CSA 22.2 No. 107.1
Smart Display Features:	Output current, Input frequency, Battery voltage, Battery temperature, Output VA, Standby time, DOCSIS® parameters, Built-in diagnostics, Output power (W), Output voltage, % load, Input voltage, Charger current, Number of events

Optional Features
Smart Protective Interface Module (PIM/N+1): Provides two programmable outputs from a single XM2 CableUPS power supply for redundancy in critical applications. The PIM protects system components and provides isolation between distribution legs by shutting down the individual load during over-current conditions.

Document Downloads

Title	Type	Version	Date
XM2/XM2-HP CableUPS Enhanced Data Sheet	Datasheet	049-348-10-004 (07/2010)	July 21, 2010
XM2/XM2-HP CableUPS Quick Start Guide	Manual	017-805-B5-008 Rev. H	December 22, 2010
XM2/XM2-HP CableUPS Technical Manual	Manual	017-805-B0-010 Rev. K	December 22, 2010

You might also be interested in these other Alpha products:

AlphaCell GXL

165, 195 and 220 GXL GelCell Batteries

Continuity -SPS

Power Supply Status Monitoring

PWE Enclosure

Outdoor Pole Mount Enclosure

Surge Protection

LA and SM Series